CNC project for beginner operators ( Horizontal twin cylinder)

[stevehuckss396]

3 more for me to keep.

 

[gld]

Hey Steve--HELP


Finally got around to working on this thing.

Found a problem in the DoubleCylinder2impTop.tap file. It starts when Z changes too Z-0.060. Check the J in this line {G2 X-1.0535 Y-0.4449 I-1.4836 J874.3084} and here {G2 X0.2242 Y0.2443 I-0.3937 J-2075.7443}

and it gets worse when z goes to -0.09 {G2 X0.2294 Y0.4468 I0.3795 J-3535.6588}---{G2 X-1.0938 Y-0.4469 I-2.499 J1556.8827}

Steve: Disregard...I've determined DeskCnc will not run this file. Doesn't recognize the G91.1 code.

I have all the parts made except for the cylinder top profile. If you have a dxf of the cylinder, might be able to salvage this project

 

[canadianhorsepower]

Steve, would it be possible to have the G code in note pad format. I could use them on our Emco CNC as project for student's. Looks great and they could all have one to brag about

 

[gld]

Steve, would it be possible to have the G code in note pad format. I could use them on our Emco CNC as project for student's. Looks great and they could all have one to brag about

LUC

The .tap file will open in note pad. You can then save with the extension you need

 

[xpylonracer]

Hi Luc

How do you cope with the G02 and G03 commands on the Emco ? Do you use MFI ?

Rgds, Emgee

 

[canadianhorsepower]

LUC

The .tap file will open in note pad. You can then save with the extension you need

thanks Ill give that a tryThm:

 

[canadianhorsepower]

Hi Luc

How do you cope with the G02 and G03 commands on the Emco ? Do you use MFI ?

Rgds, Emgee

I can only answer first part:fan: no problem with G02 or G03 as long as
G17-G18-G19 are set accordingly

as for MFI :hDe: huhhhhhhth_wtf1does it mean