Mastiff lc mason engine REDO .

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hi All !
An update
Small project within this project
I put some temporary parts together, and saw if the cutting process worked as I intended.



Cutter.jpg
 
Do you have the equipment that you can rotate the gear?
I made my own equipment for rotate the gear. In the video just a few simple parts so I can see how it cuts
I'm having trouble and trying to solve it
- In the video the cutter is above the workpiece and there is no place for me to mount the equipment on the machine (lathe)
-->> If I move the cutter below the workpiece I need to make an extension for the slide and I also need to make sure the cutting direction of the teeth is correct, L or R
 
I made my own equipment for rotate the gear. In the video just a few simple parts so I can see how it cuts
I'm having trouble and trying to solve it
- In the video the cutter is above the workpiece and there is no place for me to mount the equipment on the machine (lathe)
-->> If I move the cutter below the workpiece I need to make an extension for the slide and I also need to make sure the cutting direction of the teeth is correct, L or R
Without the rea; thing with the real lathe it is very difficult to see how to advise. It looks like it should be relatively simple
 
Back
Top