Mastiff lc mason engine REDO .

[minh-thanh]

Similar to my post 122

 

[minh-thanh]

Hi All !
An update
Small project within this project
I put some temporary parts together, and saw if the cutting process worked as I intended.

 

[Jens Eirik Skogstad]

Correct, the gear must rotate while cutting the gear to make curved teeth in correct shape.

 

[Richard Hed]

Hi All !
An update
Small project within this project
I put some temporary parts together, and saw if the cutting process worked as I intended.



View attachment 161061

Do you have the equipment that you can rotate the gear?

 

[minh-thanh]

Do you have the equipment that you can rotate the gear?

I made my own equipment for rotate the gear. In the video just a few simple parts so I can see how it cuts
I'm having trouble and trying to solve it
- In the video the cutter is above the workpiece and there is no place for me to mount the equipment on the machine (lathe)
-->> If I move the cutter below the workpiece I need to make an extension for the slide and I also need to make sure the cutting direction of the teeth is correct, L or R

 

[Richard Hed]

I made my own equipment for rotate the gear. In the video just a few simple parts so I can see how it cuts
I'm having trouble and trying to solve it
- In the video the cutter is above the workpiece and there is no place for me to mount the equipment on the machine (lathe)
-->> If I move the cutter below the workpiece I need to make an extension for the slide and I also need to make sure the cutting direction of the teeth is correct, L or R

Without the rea; thing with the real lathe it is very difficult to see how to advise. It looks like it should be relatively simple