Another Internal Combustion Engine

[Rdean33422]

Not often we get to see a governor on a model.
Nice job !

This will be my third engine with a fly ball governor.
Thanks Jojo

Looks great Ray, and I’m on pins and needles waiting for the first “pop”!!!

There is still a lot to do yet and I keep adding more features to the engine.
Thanks John

This is the head mounted on the engine.
What do you think?
Do you like the name?


It has proven to be abundantly clear to me that the flywheels I made are way too small. I have a pair of 8" round cast iron slugs from McMaster Carr with the certification papers to be free of voids and hard spots. Cost me some $$$ but the others were just too small for this long stroke engine.
Out of the box they weighted right at 11 pounds each and at this roughed in stage they are at 6lbs 12oz and there is still more to be taken off later.


Now to clean up the lathe and the rest of the shop.
They did machine nicely though.


Thanks for looking
Ray

 

[Danuzzo]

Ray, I have been whittling away for several days now at a flywheel for my first I.C., the Webster, much smaller than the ones you describe. I thought it was mild steel; but, it is much harder (rounded some of my HSS lathe tools). I still have one side of the flywheel to go, as far as the internal depth. I have learned that I very much dislike making flywheels from scratch.