- Joined
- Aug 16, 2013
- Messages
- 1,065
- Reaction score
- 808
Have to love the 3D printer for making up quick and dirty jigs and fixtures. I guess that's the Rapid Prototype part of RepRap. Print it, use it, and into the recycle bin. The Oldham is working like it should and the clutch engages and disengages freely.
After test fitting it in the existing frame I think with a little work I’m going to keep going and see if I can just use it. First thing I’ll have to do is cut down the plate that mounts to the table. After putting it on I realized it would hit the DRO on the Y axis.
After test fitting it in the existing frame I think with a little work I’m going to keep going and see if I can just use it. First thing I’ll have to do is cut down the plate that mounts to the table. After putting it on I realized it would hit the DRO on the Y axis.
