6 Cycle Internal Combustion Engine

[fahrwud]

This one always fascinated me - the 1895 Mery engine. 6-cycle.....I think.
FW

https://www.homemodelenginemachinist.com/threads/my-1895-mery-engine.17841/

 

[Rdean33422]

I cut out a connecting rod and added a brass bushing in the piston end.
This is the way I cut off the caps on the main and rod bearings after the bolt holes are drilled.


Everything even fit and in line.


Next I will take it all apart and do some filing, some polishing, and make some cross beam supports with rubber feet.

Thanks for looking
Ray

 

[Rdean33422]

All back together and shined up.


I received the helical gears and the driven gear is big that's because of the 3 to 1 gear ratio.
I will have to do some special machining to make them fit and still get the flywheel on the shaft.


Thanks for looking
Ray

 

[Rdean33422]

In order to get enough room for the driven cam gear and the flywheel to happily coexist on the crankshaft I milled a slot in the bearing support.


Here is a shot of the outrigger legs front and back with rubber feet attached.
I will be using a pair of flywheels I had made for a different engine but didn't use.
Note the stepped slot for the cam gear.


Thanks for looking
Ray