WTB used busybee lathe 9 or 10x18

[TorontoBuilder]

I have been looking for a decent used lathe located in Southern Ontario anywhere from Ottawa to London. So far I've driven to see a few only to have the owner no show or to have it have been sold before I got there...

first come first served policy sucks when people are driving from out of town, so I am happy to put deposit via interac email transfer if someone wants.

I've got a nice CT129N milling machine but can't make much without a lathe to go with it... ready to buy now...

Thanks
John

 

[canadianhorsepower]

check Kigigi there is alot on there

 

[TorontoBuilder]

check Kigigi there is alot on there

Thanks Luc, I've been looking on kijiji. Thats where all the flakes are who have been no shows or give me the run around via email. I'm about ready to bite the bullet and buy a new shop fox or busybee lathe at this point.

 

[nowramfg]

I just bought a BusyBee CX706 10X22. It appears to be very good.

 

[nowramfg]

Here is my basement workshop. You can see the lathe on the RH side.

 

[TorontoBuilder]

Here is my basement workshop. You can see the lathe on the RH side.

Nice shop... I've been flirting with the idea of a 706, esp since I want to machine 6" diameter rollers for a printing press. My wife however had would prefer I go with something used for half the cost.

 

[canadianhorsepower]

Thanks Luc, I've been looking on kijiji. Thats where all the flakes are who have been no shows or give me the run around via email. I'm about ready to bite the bullet and buy a new shop fox or busybee lathe at this point.

this is a deal

http://busybeetools.ca/cgi-bin/picture20c?NTITEM=CT041X04

 

[Theclockworks]

I'am guessing you had fun getting it down there they no light weight.

 

[TorontoBuilder]

this is a deal

wow.. you shud delete that link now... haha I dont want someone to scoop me on it

 

[nowramfg]

I'am guessing you had fun getting it down there they no light weight.

A little help from a son in law. It wasn't as bad as I thought it was going to be. I removed as many items as is easily removed.

 

[mygrizzly1022]

Here is one in your neck of the woods put up today...

bert

http://www.kijiji.ca/v-tool-other/k...he/1032865971?enableSearchNavigationFlag=true

 

[TorontoBuilder]

this is a deal

http://busybeetools.ca/cgi-bin/picture20c?NTITEM=CT041X04

THANKS LUC!

That was such a nice deal that I bought it. I've been online on the busybee website literally hundreds of times but for some reason never looked under their clearance menu.

 

[canadianhorsepower]

THANKS LUC!

That was such a nice deal that I bought it. I've been online on the busybee website literally hundreds of times but for some reason never looked under their clearance menu.

Thats were I shop first good for you Thm:Thm: