SOLD- Grizzly 7x12 Mini-Lathe, Like NEW w/ Upgrades, Western Maryland

[littlelocos]

Hello All,
My son, Patrick, has decided to sell his Grizzly 7x12 mini-lathe. He's gotten more into wood turning and decided to free up some funds by selling the lathe.All told, the lathe is about 5 years old, but may only have 6-8 hours use and is in nearly-new condition.

I have added several improvements to the basic package offered by Grizzly, including changing the calibrated screws and dials to "true inch", adding a spindle tachometer, a quick-change tool post, and a 4-jaw chuck.

Not including shipping & freight, the above would run about $950. We’re asking $750.

Specifics for these can be found as listed below:

· Grizzly 7x12 Mini-Lathe - http://www.grizzly.com/products/7-x-12-Mini-Metal-Lathe/G8688

· Inch Conversion Kit – http://www.littlemachineshop.com/products/product_view.php?ProductID=2383&category=

· 4”, 4-jaw independent chuck – http://www.littlemachineshop.com/products/product_view.php?ProductID=1588&category=

· Digital spindle tachometer - http://www.littlemachineshop.com/products/product_view.php?ProductID=1684&category=

· Quick-Change Tool Post set – http://www.harborfreight.com/quick-change-tool-post-set-for-mini-lathe-42806.html.

Thanks,
Todd.

 

[Tin Falcon]

Greetings Todd. The kids are growing up.

Tin

 

[littlelocos]

Hey Jim,
That's for sure, seems like yesterday that they were "helping" us at the Cabin Fever show at 6 or 8 years old.
Todd.

 

[littlelocos]

Just a short note to let you folks know that I posted the lathe to eBay. It closes tomorrow.

It can be found here:
http://www.ebay.com/itm/330970560241?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1586.l2649

BTW, the 4" 4-jaw chuck listed is actually a 3". Found this out after I measured the 3" self-centering.

Thanks,
Todd.

 

[Tin Falcon]

The lathe sold winning bid $495.00 so some one got a pretty good deal since the current retail on the machine only is $625.