Model eng. from Leavenworth
- Thread starter gt2ride
- Start date
Help Support Home Model Engine Machinist Forum:
jwcnc1911
-jwcnc191
- Joined
- Mar 19, 2013
- Messages
- 603
- Reaction score
- 86
I'm new to HMEM so I've been flipping through older posts...
That is probably the best "Elmer's Tiny" I've ever seen. As of late I've gotten back into steam engines and the little ones are fascinating me right now. Love how smooth the lines are on your tiny, and the contour appears to be to print... very difficult at that size. I won't even lie, I CNC'd the column.
Side note: if you google image search "elmer's tiny" you will find a half scale tiny as well as a similar one but about 1/4 the size of the Tiny.
That is probably the best "Elmer's Tiny" I've ever seen. As of late I've gotten back into steam engines and the little ones are fascinating me right now. Love how smooth the lines are on your tiny, and the contour appears to be to print... very difficult at that size. I won't even lie, I CNC'd the column.
Side note: if you google image search "elmer's tiny" you will find a half scale tiny as well as a similar one but about 1/4 the size of the Tiny.
Swift752
Well-Known Member
- Joined
- Aug 28, 2012
- Messages
- 53
- Reaction score
- 1
Can anyone help me with the plans for the Elmer paddle boat engine (not at the Elmer site) above and , in English, the Modelldampfmaschine V10/12. It's a beautiful Vee 2 steam engine. You can see it at I'm just dieing to make both of them. I've made all but 5 of the above engines. Thanks!
toolznthings
Project of the Month Winner
You have been busy !!! Great job on all the builds and thanks for showing. 
Brian
Brian
