Gouging pin diameter

[Drei]

Hi,

is a 6 mm diameter to small for a gouging pin situated in a 1\4 v8 engine. the engine would rev for about 10000 because it will be supercharged.

Thanks
Drei

 

[gbritnell]

With about a 19.00 mm. bore I would say that the wrist pin (gudgeon pin) could be 5.00 mm.
gbritnell

 

[Drei]

The bore will have a diameter of 25 and also the stroke is 25 with a compression ratio of 10:1.

Drei

 

[Jasonb]

You could probably then take it upto 6mm and bore it 4mm to keep the weight down.

J