Depenbusch Hit Miss

[hula-hula_guy]

I posted on a different forum here kinda by mistake. So instead of reposting I am just going to link it here instead. Please check it out, read my description included there and come on back and post your comments. Thanks guys!



http://www.homemodelenginemachinist.com/engines/depenbusch-hit-miss-192.html

 

[Jasonb]

Try a non return valve in the fuel line as your tank looks lower than the needle, as the engines start to run slower the fuel can drain back into the tank between "Hits"

Also the TIM-6 is meant for 6volts, probably not causing problems with the running but may fry something over time.

J

 

[Mike1]

You could try retarding the ignition a little which may assist the slow running, but as a hit and miss engine has no throttle control it will only slow down when the exhaust is latched out
I would move the fuel tank a bit closer to the fuel mixer, a shorter fuel supply line may help with the suction on slow running.

Mike1