Time to start a Snow build

Shop deals on ebay
Advertise with us
Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Martin Urbanski01

Martin Urbanski01

New Member
HMEM Supporting Member
Joined
Jun 21, 2023
Messages
3
Reaction score
4
I'm from Michigan and we have a HUGE engine show in the little town of Buckley. Among the great variety of engines, tractor and other assorted things, they have a original running Snow engine. Along side of this monster was and older gentleman who had a very beautiful model of said engine. after talking to him and exchanging our backgrounds, I asked about the flywheel. That is when I decided I also would build one. Because of all the tiny details in that flywheel. And the cool cams.
This is some of my work.
 

Attachments

  • DSC_2756.JPG
    8.8 MB
  • 20220314_204258.jpg
    20220314_204258.jpg
    3.7 MB
  • 20230221_194710.jpg
    20230221_194710.jpg
    869.4 KB
  • 20231112_162038.jpg
    20231112_162038.jpg
    897.8 KB
  • 20241008_180608.jpg
    20241008_180608.jpg
    2 MB
  • 20221111_143054.jpg
    20221111_143054.jpg
    1.8 MB
Some very nice engine builds you have there.
I am sure you can pull off a Snow engine, although it may take a while.
Do you have some plans to use as a go-by ?
.
 
Martin - I would suggest that you search these forums, there are several posts about the Snow builds, along with some very helpful adjustments to the design of some of the components to help with reliability. I built one and it was a very fun and rewarding build.
 
Yes, I have the magazine that featured this engine.
burn0170 said:
Martin - I would suggest that you search these forums, there are several posts about the Snow builds, along with some very helpful adjustments to the design of some of the components to help with reliability. I built one and it was a very fun and rewarding build.
Click to expand...
I will, so far I have only made decent copies of the prints, and will start to collect stock.Thanks
 
You must log in or register to reply here.

Similar threads

mayhugh1
Another Knucklehead Build
18 19 20
Replies
385
Views
135K
mayhugh1
mayhugh1
smuttley
How to build and run a Stirling engine the first time out
Replies
7
Views
24K
Qtron
Q
P
A new specialty magazine?
Replies
16
Views
5K
Cedge
Cedge
Cedge
Ya gotta love the engine community, big and small
Replies
12
Views
6K
bearcar1
B

Latest posts

Back
Top