1/4 Scale 1895 St. Joseph Iron Works veneer lathe

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Mike N

Well-Known Member
HMEM Supporting Member
Joined
Nov 7, 2008
Messages
374
Reaction score
359
Location
Northern Minnesota
It all started last fall when I saw this old veneer lathe at LeSeur Pioneer Power show in Southern Minnesota. I wanted to add another implement for my 1/3rd Scale Case Steam Engine to demonstrate at Antique Tractor shows. DSCN6437.JPGDSCN6474.JPG
 
Last edited:
I will post a video once I get time to fire up the Steam Engine and make some veneer. I have change gears on the feed drive so I can make veneer from .057" - .085" thickness.

https://photos.app.goo.gl/HMiXF3wZcqtnLEVk6

This video was taken early on just to see if it would work! The log was big tooth aspen. It can handle 13" diameter logs 18" long. This will yield approximately 250 lineal ft. of veneer.
 
Last edited:
I am impressed with this project and your abilities to get it made. There definitely will be lots of things to watch when it is running.

Congratulations on accomplishing this and Thank You for posting it for us to see.

--ShopShoe
 
That is a most impressive piece of equipment, and so well done !
Fantastic.
My family was in the hardwood lumber business for over 100 years, and they would be most impressed with that machine.
.
 
I would imagine that some of the hardwoods will really make that steam engine do some serious work. That's got to take some power and a razor sharp blade to cut the veneer off the full width of the blank.
 
I know it's a big ask, but do you have some drawings with dimensions? Wonderful build!
 

Latest posts

Back
Top