Westbury Wallaby Likeness

[D and D]

A twin based loosely on the Westbury Wallaby nearing completion.

 

[minh-thanh]

Great !

 

[Eccentric]

Awesome, show me more! show me more!

 

[D and D]

Awesome, show me more! show me more!

Thanks, more to come. I hope to finish it over the Christmas break , I will keep you posted.

 

[D and D]

Carby Finished

 

[D and D]

Final Assembly

 

[D and D]

 

[D and D]

Running nice now, just need to finish the base and tidy it up.

 

[D and D]

Finished

Engine is a 36cc parallel (360 Degree) twin based loosely on the Wallaby design by Edger Westbury.

Capacity: 2.2 Cubic Inch (36 cc)

Bore: 1.08”

Stroke 1.22”

Compression ratio 6 to 1

The engine was an experiment, I wanted to build something with the following:

Air Cooling

More than one cylinder

Closed oil system (Sump)

Pressure feed to the Big End Bearings

A High-Tension Distributor

Eccentric valve adjusters

Ground hardened camshaft with flat tappets.

 

[Gedeon Spilett]

great !
congratulations, a nice and running well engine !
the engine responds pretty well to the carb setting, vrooom vroom

 

[minh-thanh]

Congratulations, Nice engine and runs great !