USS MONITOR SIDE LEVER ENGINE

[wce4]

USS MONITOR SIDE LEVER ENGINE
Design by Bob Middleton
CAD drawings by Julius de Waal - imperial


This is Where the Fun Begins, the Planning Phase.

https://modelengineeringwebsite.com/USS_Monitor_imperial.html

 

[GreenTwin]

Good luck.

.

 

[wce4]

Well after having a productive high tech meeting with me myself and I and also with the Department of the Treasury (my better and smarter half, the wife) . We came to the consensus that we will be replacing BMS (bright mild steel) parts with aluminum that I have on hand.
So without further ado let the machining begin.
FRONT AND REAR OUTER BASE FRAME Done
FRONT AND REAR INNER BASE FRAME Done

 

[GreenTwin]

after having a productive high tech meeting with me myself and I and also with the Department of the Treasury

LOL, I call it "The War Department".

.

 

[ddmckee54]

LOL, I call it "The War Department".

I know exactly what you mean, I can NEVER get those other two idiots to agree.

 

[user 43710]

I know exactly what you mean, I can NEVER get those other two idiots to agree.

 

[user 43710]

In fully understanding the difficulty getting the finance office to endorse the whims of the technical department I took an executive decision as CEO and determined that ALL decisions must be approved by the committee. Said Committee must consist of an odd number of members and shall not exceed one. As CEO I have the casting vote, hence the project always meets with full approval.

 

[ajoeiam]

In fully understanding the difficulty getting the finance office to endorse the whims of the technical department I took an executive decision as CEO and determined that ALL decisions must be approved by the committee. Said Committee must consist of an odd number of members and shall not exceed one. As CEO I have the casting vote, hence the project always meets with full approval.View attachment 151979

A very very brave man!

rotflmho

 

[Richard Hed]

In fully understanding the difficulty getting the finance office to endorse the whims of the technical department I took an executive decision as CEO and determined that ALL decisions must be approved by the committee. Said Committee must consist of an odd number of members and shall not exceed one. As CEO I have the casting vote, hence the project always meets with full approval.View attachment 151979

Is that the Gizzard of Gozz?

 

[ddmckee54]

Is that the Gizzard of Gozz?

No, that be the Earl of Doncaster.

 

[ajoeiam]

Hmmmmmmm - - - - methought it was the Baron von u. zu Habenichts

 

[Samet ÇALIŞKAN]

Hi, I have made this engine before. It can help you.

 

[wce4]

Hi, I have made this engine before. It can help you.

Thank you, If I run into trouble I will take you up on your offer of help.
But for now I am out of the shop and working on the honey do list.

 

[wce4]

I made it back to the shop today, was able to fabricate.
Part # 03-OUTRIGGER BASE FRAME x 2
05-BASE FRAME TIE ROD TYPE-A x 2
06-BASE FRAME TIE ROD TYPE-B x 4
Change BASE FRAME TIE ROD from round stock to hex stock. It was a Personal preference,
to me it looks better than round tubing what do you guys and girls think?

 

[wce4]

Part #04-OUTRIGGER TOP PLATE x 2 completed


Part #14-CYLINDER MOUNTING PLATE x1 completed
Part #15-REAR FRAME SPACER PLATE x1 completed

 

[wce4]

Feeling under the weather today so did not accomplish
much in the shop today.
Part #11-CRANK SHAFT REAR MAIN BEARING x1 completed
Part #12-CRANK SHAFT FRONT MAIN BEARING x1 completed
Part #13-CRANK SHAFT MAIN BEARING LOCKING RING x2 completed

 

[wce4]

It never cease to amaze me the many things a lathe can make.
From two piece of rectangle flat stock one can make a round split bearing.

Part #10-REAR BEARING SPLIT LINING x2 completed

Part #08-FRONT BEARING LINING x2 completed
That completes all parts on sheet 7 of 14 now onto the next part sheet 8 of 14.

 

[paulrayner]

great idea

 

[wce4]

Taking an unscheduled vacation/holiday to the V.A. so updates will be unavailable for a while.
Happy Holidays everyone. Hope to be back soon.

 

[alcostich]

Taking an unscheduled vacation/holiday to the V.A. so updates will be unavailable for a while.
Happy Holidays everyone. Hope to be back soon.

wce4,
Not entirely off topic...I have been treated very well at the local VA.
Hope your visit is not too serious.

Alan