hello , i am new member, last summer i built a webster engine, and decided after that i would design my own engine, i started in cad drawing up on dec 25 2023,
and what i ended up with is this, this last saturday evening i tried starting it , and it ran, !! yay
there is lots to do, yet , gas tank, cooling fines, electric start, etc . and more tuning on carb.
this was my first time making gears, . thanks to roy for cdi!
lots to do yet ,
.875 bore
1.24 stroke
2 cast iron ring
cylinder steel liner, and is pinned at base to aluminum
s&s cdi ignition
.094 valve stems,
.250 valves
.375 crank pinned , keyed 3/32 and 3/8-24 threaded on flywheel side
thanks for taking your time to look at
Dan from northfield mn, usa.
and what i ended up with is this, this last saturday evening i tried starting it , and it ran, !! yay
there is lots to do, yet , gas tank, cooling fines, electric start, etc . and more tuning on carb.
this was my first time making gears, . thanks to roy for cdi!
lots to do yet ,
.875 bore
1.24 stroke
2 cast iron ring
cylinder steel liner, and is pinned at base to aluminum
s&s cdi ignition
.094 valve stems,
.250 valves
.375 crank pinned , keyed 3/32 and 3/8-24 threaded on flywheel side
thanks for taking your time to look at
Dan from northfield mn, usa.
