Tandem Compound Poppet Valve Steam Engine Build, ala Cedge
- Thread starter Cedge
- Start date
Help Support Home Model Engine Machinist Forum:
Cedge
Well-Known Member
- Joined
- Jul 12, 2007
- Messages
- 1,727
- Reaction score
- 28
Gentlemen
It is with great consternation that I post this. This thread is being put on hold for the time being. A series of health issues have sort of cascaded on me since early June, taking me out of the shop for safety reasons. None of the issues are life threatening but it does require me to take medication that makes it too dangerous to operate the machines. A fuzzy head and spinning devices are simply incompatible here.
I've got high hopes that things will soon be under control and that I can jump back on the project before cold weather arrives again. Thanks for the wonderful support everyone has shown and please accept my apologies for the unavoidable delay. We'll get her done, but only when it can be fun and safe again.
Steve
It is with great consternation that I post this. This thread is being put on hold for the time being. A series of health issues have sort of cascaded on me since early June, taking me out of the shop for safety reasons. None of the issues are life threatening but it does require me to take medication that makes it too dangerous to operate the machines. A fuzzy head and spinning devices are simply incompatible here.
I've got high hopes that things will soon be under control and that I can jump back on the project before cold weather arrives again. Thanks for the wonderful support everyone has shown and please accept my apologies for the unavoidable delay. We'll get her done, but only when it can be fun and safe again.
Steve
zeeprogrammer
Well-Known Member
- Joined
- Mar 14, 2009
- Messages
- 3,362
- Reaction score
- 13
Take care of yourself.
![MeshMagic 3D Free 3D Modeling Software [Download]](https://m.media-amazon.com/images/I/B1U+p8ewjGS._SL500_.png)
mklotz
Well-Known Member
It's a hobby. There's no schedule. You should be commended for having the good sense to stay away from machinery when you're medically stoned. 
Take care of yourself. The engine can wait.
Take care of yourself. The engine can wait.
You just keep in there mate, things do and will get better.
I've been thru what you are going thru for the last six months or so. After the quacks have finished, only time and self confidence to get better will cure your ills, so as soon as you see the light at the end of the tunnel, start to run a bit faster towards it.
John
I've been thru what you are going thru for the last six months or so. After the quacks have finished, only time and self confidence to get better will cure your ills, so as soon as you see the light at the end of the tunnel, start to run a bit faster towards it.
John
New to model engineering and to this site Steve.Disheartened to hear of your health situation but keep the faith.Watching the build here with anticipation.
I have also seen with great appreciation your handiwork elsewhere on your steam gallery site.Especially enthralled by your Victorian elbow engine.
May be improper to ask here but wondered if any plans exist for that particular build???
Don't know of any other venue within which to ask.
Regardless,best to you and take care of yourself,,,,,,ya got a lot of folks rootin' for ya here.
Just a thought,,,but if you were within a hundred miles of Michigan I'd be glad to swing by sometime and turn the crank for ya while you direct from the La-z-Boy!!!!!
I have also seen with great appreciation your handiwork elsewhere on your steam gallery site.Especially enthralled by your Victorian elbow engine.
May be improper to ask here but wondered if any plans exist for that particular build???
Don't know of any other venue within which to ask.
Regardless,best to you and take care of yourself,,,,,,ya got a lot of folks rootin' for ya here.
Just a thought,,,but if you were within a hundred miles of Michigan I'd be glad to swing by sometime and turn the crank for ya while you direct from the La-z-Boy!!!!!
Cedge
Well-Known Member
- Joined
- Jul 12, 2007
- Messages
- 1,727
- Reaction score
- 28
O.H....
Thanks for the kind words. Sadly making drawings is not among my talents. I tend to prescribe to Bogstandard's Crap O' Cad school of design. Scraps of paper with a quick sketch and no real organization. littlemachinmeshop.com did have drawings for a 10 cylinder elbow, but I've not looked recently to see if they still offer it.
I'm back on the beam where health is concerned, but local show schedule has me hopping for the next few weeks. I'm hoping to get back on the project in the near future... if I can get past doing repairs to keep all the damned things running a the shows....LOL. Had to do some minor repair work on 3 today, after this past weekend show.
Shame about the distance... always got an extra bucket of steam on hand for just such visits....(grin)
Steve
Thanks for the kind words. Sadly making drawings is not among my talents. I tend to prescribe to Bogstandard's Crap O' Cad school of design. Scraps of paper with a quick sketch and no real organization. littlemachinmeshop.com did have drawings for a 10 cylinder elbow, but I've not looked recently to see if they still offer it.
I'm back on the beam where health is concerned, but local show schedule has me hopping for the next few weeks. I'm hoping to get back on the project in the near future... if I can get past doing repairs to keep all the damned things running a the shows....LOL. Had to do some minor repair work on 3 today, after this past weekend show.
Shame about the distance... always got an extra bucket of steam on hand for just such visits....(grin)
Steve
- Joined
- May 18, 2010
- Messages
- 84
- Reaction score
- 10
I hope your health returns swiftly Steve! I love watching your builds.
I recently had to take time out from my shop, though not for health reasons, and I ended up doing a heap of research about this and that, and when I finally did get back in the shop, I was full of ideas and plans and have since been chipping away at them. As a result my lathe has been totally transformed and I've added engraving, spherical cutting and grinding to my capabilities. I'm sure a man such as yourself will find many a productive pursuit whilst out of the shop, but once again, hopefully that is not for too long.
Ben
I recently had to take time out from my shop, though not for health reasons, and I ended up doing a heap of research about this and that, and when I finally did get back in the shop, I was full of ideas and plans and have since been chipping away at them. As a result my lathe has been totally transformed and I've added engraving, spherical cutting and grinding to my capabilities. I'm sure a man such as yourself will find many a productive pursuit whilst out of the shop, but once again, hopefully that is not for too long.
Ben
