For Sale Late 1960s early 1970s Stuart Casting Kits

[fltenwheeler]

Asking price, open to offers. You pay shipping and PayPal costs.

#4 Vertical with Reverse $575
#7A Vertical with Reverse $400

Compound without Reverse $300
Double #10 with Reverse $300

Thank you for looking.

Tim Meyer

 

[kvom]

Posting location could be useful.

 

[fltenwheeler]

I am in Winter Haven, Florida. Just south of I4 between Tampa and Orlando.

Tim

 

[SirJohn]

Would appreciate a few pictures and some detail

 

[fltenwheeler]

I will get the sets of castings from the storage area and get some pictures.
Is there any particular engine that you are interested in?

Tim

 

[H Pearce]

Hi Tim,

I would be interested in the compound with reverse.
Pictures would be great.
Thanks.

 

[fltenwheeler]

Here are some pictures of the Compound engine and the stack of engines I will be selling. In the big wood box is a 4”x4” engine based on the Stuart #1 that set of castings will have to go by truck

 

[fltenwheeler]

It appears that I duplicate some of the pictures.
Tim

 

[fltenwheeler]

This is a 12”x12” box. Could this be parts for a Stuart #3? I will have to dig and see what else I can find.
Tim

 

[Chris W]

Do you have any info on the 4 x 4 engine? Do you have drawings?
Thanks, Chris

 

[fltenwheeler]

Hi Chris

I have no information other what is written on the crate. I did find a small box that states that it is the bronze parts for the 4”x4” engine. I think there is a 5a feed pump castings that was to go on the engine. The flywheel is 14” in diameter. Double of a standard #1 so I would just use plans for a #1 and double the dimensions.
I will get some pictures in the morning. The castings are in the attic and it is already quite warm up there.
Tim

 

[fltenwheeler]

This is a picture of the 4”x4” engine modeled from the Stuart #1. The flywheel is 14” in diameter.
Tim

 

[fltenwheeler]

Here is a picture of the Stuart #7A. I can not find the drawings for it.
Tim

 

[fltenwheeler]

Here are pictures of the Stuart #8.

Tim

 

[maury]

Y'all, I would NEVER buy a casting set without the drawings unless I already had them. Also beware of missing parts.

maury

 

[fltenwheeler]

Y'all, I would NEVER buy a casting set without the drawings unless I already had them. Also beware of missing parts.

maury

Stuart is still in business plus I am sure that someone has the drawings and are done with them. There is an inventory list with the #8. These castings are a lot better than what you get today from what I have heard.
Tim

 

[metalmangler]

Stuart-Turner will sell you the drawings separately. My son found an old (1950's ?) set of 10H castings whilst clearing a shed, and S-T sold me the drawings for UKP 16 a couple of months ago.

 

[fltenwheeler]

Thank you I will contact them.
Tim

 

[packrat]

That is a nice stass of castings you found, I had to find Stuart drawings for a 5A engine and they were available...

 

[Charles Lamont]

I am reasonably sure the big bedplate and standards for a twin are not Stuart parts. The absence of a radius at the corners of the bedplate is one good clue among several.