Lanz tractor

[Tapsa]

My new project will take time, a year or two, I don't know.

 

[minh-thanh]

Hi Tapsa .
That is Great Project !
I got a question, what engine do you use ?

 

[Tapsa]

I don't know the correct engine name in English, but I would assume a hot plug motor

 

[Tapsa]

Crankshaft parts complete

 

[Tapsa]

Piston

 

[kadora]

Did you silver soldered crank shaft parts?

 

[Tapsa]

I haven't had time to do it yet but I

 

[Tapsa]

Not so many parts are ready compared with the time used

 

[Tapsa]

Hello everyone, has been busy for two weeks. I haven't had a workshop at all. I was a Speedway race in Latvia. from the video you can see Latvian competitions. I do not run a race, I'm only sponsor of the team.
Tapsa

 

[Tapsa]

Today I was able to do some parts again

 

[a41capt]

Hello everyone, has been busy for two weeks. I haven't had a workshop at all. I was a Speedway race in Latvia. from the video you can see Latvian competitions. I do not run a race, I'm only sponsor of the team.
Tapsa

In another life, many, many years ago (1968 ), I had the opportunity to run a couple Speedway races in Orange County, California.

As a flat track rider, I thought I was prepared to run competitively, and while I finished third on my first attempt, I didn’t have sponsorship, and was using a loaned bike (J.A.P. On a Hagon frame). That was an expensive sport, and as a teenager, beyond my financial capability to continue!

Thanks for the memories!!!

Sorry for the hijack, but I had to comment on the Tapsa post.

 

[kadora]

Speedway races were popular in 1968 in Czechoslovakia . I was big fan .
I have built little JAWA ESO speedway engine to remind my youth.

 

[a41capt]

Speedway races were popular in 1968 in Czechoslovakia . I was big fan .
I have built little JAWA ESO speedway engine to remind my youth.

Fantastic! Any more pictures?

John W

 

[Tapsa]

Hello kadora Have any drawings on your engine. I would be very interested in buying. Thank you for the great picture of the Jawa engine.
Tapsa

 

[kadora]

Thank you guys.
My thread to Eso engine
https://www.homemodelenginemachinist.com/threads/eso-engine-machining.26051/

 

[Tapsa]

Hey everybody. Fuel tank and other small parts, I had time to do

Tapsa

 

[wesley]

Great work am following along with joy,its a pity there is not alot of model tractors being made,maybe this will start a lanz trend to make them,keep it up.

 

[Tapsa]

Thanks, I'm so busy with my work and can concentrate on this only on weekends, if even then.

 

[michelko]

Very nice Project, will follow it for sure.
About the gear, are you sure you used the right cutter?
It´s marked as #7 55-134 teeth. For a ten tooth gear it should be cutter #1
The gear (tooth) doesn´t look Right to me.

Michael

 

[Tapsa]