flashbang
New Member
- Joined
- Apr 10, 2010
- Messages
- 4
- Reaction score
- 0
Hi,
Great fourm you all have here.
Anyone know of the part numbers and where to get high quality ie. Timken or such spindle
bearings for a R8 taper, including the one on top of the head? Anything is better than what the machine came with at this point. I have found a few people been using a tappered bearing on the top on the spindle instead of the stock radial and thrust bearing, but I can't find a solid known part and make that will work.
Found some new info.
What I gather is:
Grizzly bearing 32907 (taper bottom) can be directly replaced with NTN bearing 32907XU.
Grizzly thrust bearing 8106 and radial bearing 80106 (top) can be replaced with an SKF 32006 X/Q using the thrust washer that had been between the thrust and radial bearings to fill the gap as a spacer.
Are this the correct bearings?
Where to buy them?
What grease to use?
Also I need to replace the top-most bearing (the one that the quill-pully is attached to)? Grizzly part number 80107.
Any number for a quality replacement?
Thank you
Artie
Thanks
Artie
Great fourm you all have here.
Anyone know of the part numbers and where to get high quality ie. Timken or such spindle
bearings for a R8 taper, including the one on top of the head? Anything is better than what the machine came with at this point. I have found a few people been using a tappered bearing on the top on the spindle instead of the stock radial and thrust bearing, but I can't find a solid known part and make that will work.
Found some new info.
What I gather is:
Grizzly bearing 32907 (taper bottom) can be directly replaced with NTN bearing 32907XU.
Grizzly thrust bearing 8106 and radial bearing 80106 (top) can be replaced with an SKF 32006 X/Q using the thrust washer that had been between the thrust and radial bearings to fill the gap as a spacer.
Are this the correct bearings?
Where to buy them?
What grease to use?
Also I need to replace the top-most bearing (the one that the quill-pully is attached to)? Grizzly part number 80107.
Any number for a quality replacement?
Thank you
Artie
Thanks
Artie