Hi
Not sure if this is the correct place for this, but its new and I made so here goes.
This was born out of the frustration of trying to accurately turn parts consistently, and the fact that the slowest leadscrew speed was far too fast for my needs. The speed of traverse on this can be set to < 30 thou per minute.
Hope its of interest.
[ame]http://vimeo.com/18780151[/ame]
with additional pictures at
http://s917.photobucket.com/albums/ad19/picclock/Cheapo Electronic Leadscrew/
Some rough design notes are in the download section. If you need any further info I'll do my best to oblige.
Best Regards
picclock
Not sure if this is the correct place for this, but its new and I made so here goes.
This was born out of the frustration of trying to accurately turn parts consistently, and the fact that the slowest leadscrew speed was far too fast for my needs. The speed of traverse on this can be set to < 30 thou per minute.
Hope its of interest.
[ame]http://vimeo.com/18780151[/ame]
with additional pictures at
http://s917.photobucket.com/albums/ad19/picclock/Cheapo Electronic Leadscrew/
Some rough design notes are in the download section. If you need any further info I'll do my best to oblige.
Best Regards
picclock
