Demon V8 Gaskets for sale

[stevehuckss396]

Ok Demon builders here is your chance. I had gaskets laser cut for the demon and while I was at it i made a bunch. I'm going to offer them for sale to those who wish to get a set. Here is the deal.


I don't wish to make a business from this. My goal is to help out the builders get nice gaskets so if you think this will help you out don't wait. After this I may have them at NAMES or Mid-East Ohio but that will be about the only way to get them

1. Email me at [email protected]
2. Let me know what sets you want
3. Provide me a mailing address formatted so it can be cut and pasted on the mailing envelope.
4. I'll calculate shipping cost and round to the next even dollar.
5. If the cost sounds good to you you can pay with Paypal or mail the money
6. I will mail all the sets in one trip to the post office on May 21,2016

I figure that will give everybody time to read the post for the guys who visit less frequently.


Engine gaskets $10
Head Gaskets $5
Blower Gaskets $10

Engine gaskets include: .010 thick

Water pump Body and the 2 little ones to seal at the block
Intake manifold to heads
Carb base gasket and bowls
Timing Cover
Bell housing adapter


Head Gaskets include 2, .020 thick gaskets


Blower Gaskets include : .010 thick

Second Carb base and bowl
Adapter Plate bottom
Adapter plate to blower housing
Housing to carb adapter
Housing to front and rear cover
Front cover to gear case

 

[stevehuckss396]

Just a reminder!

Envelopes will be going out next Saturday 21st.

Shipping has been less than 2 bucks un the US and less than 6 bucks across the pond.

 

[canadianhorsepower]

Just a reminder!

Envelopes will be going out next Saturday 21st.

Shipping has been less than 2 bucks un the US and less than 6 bucks across the pond.

Hi Steve
I did send a request never goy any feedback

cheers

Luc

 

[stevehuckss396]

Sorry Luc

I went through all my mail back to 4-30-2016 and seen nothing from you. Check the address and try to resend. Maybe there was a snafu when you sent the first time.

[email protected]

Hi Steve
I did send a request never goy any feedback

cheers

Luc

 

[Cogsy]

Hey Steve - same deal, never heard back from you. I'll resend now. Cheers.

Edit - email sent!

 

[wirralcnc]

I had a reply straight away from Steve and have received my gaskets. Great quality and definitely wouldn't want to cut some of the small ones out by hand.
Great addition to anyone wanting to build the demon v8.
Robbie

 

[ozzie46]

Steve

I used the [email protected] address also and didn't get any replies either. I had sent several messages to it. So I used the gmail address and with my paypal and it worked.

Ron

 

[stevehuckss396]

I'm sorry if anyone has had trouble getting mail to me. If you have had trouble PM me or try [email protected] and i'll get you squared away.

 

[stevehuckss396]

Great quality and definitely wouldn't want to cut some of the small ones out by hand.

Those water pump gaskets are some tiny little suckers. When you use them, cut them off leaving the tab. Assemble the water pump to the engine and then trim the tabs off with a razor blade or exacto. Do the same for the thermostat housing.

 

[stevehuckss396]

I would like to thank everyone who purchased the gaskets. They have all been posted and are on there way to you. I hope you are all pleased with the quality of the gaskets and are able to use them soon!!

Cheers!

Steve

 

[michael-au]

Those water pump gaskets are some tiny little suckers. When you use them, cut them off leaving the tab. Assemble the water pump to the engine and then trim the tabs off with a razor blade or exacto. Do the same for the thermostat housing.

Thank you Steve

 

[ozzie46]

Thanks Steve, Got mine Friday.

Ron

 

[e.picler]

Hi Steve!
I just received the gaskets today.
Very good quality.

Thanks,

Edi

 

[michael-au]

Gaskets arrived here yesterday

Thank you Steve

 

[Cogsy]

Got mine in the post today and they are AWESOME! Thanks Steve!

 

[canadianhorsepower]

Got mine to
Thanks Steve

 

[chrispare]

Recieved mine too.
Look pretty good.
Thank you Steve

 

[Davewild]

Got mine today, look perfect, thanks Steve