Clayton Steam Wagon completted

[Brian Rupnow]

Very nice!!! If I ever need my wildcat hauled, I will give you a call.---Brian

 

[MIKE4444]

Hi great project , but not a easy to build, many Hrs, type into space bar , and all ifno is there to build, Clayton Steam Wagon model
Well done , MIKE

 

[rmd55]

Hi

The Steam wagon above is mine. Here is a link to a site that will lead you to the PDF file I used to build the model. If you search "steam Wagon" on this site you will find a couple of threads I posted about the build. This is a large heavy model and is not easy to move around by yourself, so A 1.5" scale would be much more easily handled. A 1" scale would be much more difficult to build, especially the reversing system. Originally castings were available for some of the more difficult parts, now you will have to make those parts yourself.

Mark T

I don' t see any links.
Richard

 

[kadora]

HATS OFF

 

[dnalot]

I don' t see any links.

opps, look again, it is now posted

Mark

 

[sarel]

Thank you to

Hi

The Steam wagon above is mine. Here is a link to a site that will lead you to the PDF file I used to build the model. If you search "steam Wagon" on this site you will find a couple of threads I posted about the build. This is a large heavy model and is not easy to move around by yourself, so A 1.5" scale would be much more easily handled. A 1" scale would be much more difficult to build, especially the reversing system. Originally castings were available for some of the more difficult parts, now you will have to make those parts yourself.

Clayton Undertype Steam Wagon to 2 inch scale. - Article Reprints

Mark T

Thank you, however as you mentioned the Clayton is rather large and also maybe above my skills!

 

[sarel]

You might find them on this site.Ive not looked
steam and steam models

Thanks, there is a truck of a different configuration that suits my skills better. There is also a large amount of information on the site.

 

[mikelkie]

Work like that should be nominated for the gold medal, Well done!

 

[richard12356]

Hello Dnalot, great job, but the second link does not work.
Richard

 

[dnalot]

Hello Dnalot, great job, but the second link does not work

The links in the original post are dead and can not be edited. The link on "post 20" does work however.

 

[sarel]

Stoogroep Holland also have plans for a smaller steam truck Endeavor. The gentleman at Steam and steam models (french) directed me to https://www.cav-escarbille.com but i have had no response fro them. Does anybody know if the website is still active?

 

[hansh]

Hello Sarel, yes the stoomgroep Holland have plans available for the Foden Endeavour. But you can also find plans at the Mew website. I finish the Endeavour. If you need more information don't hessitate to contact me.

Hans

 

[Brian Hutchings]

Hello Sarel, yes the stoomgroep Holland have plans available for the Foden Endeavour. But you can also find plans at the Mew website. I finish the Endeavour. If you need more information don't hessitate to contact me.

Hans

Hello Hans, the Foden looks very good.
Brian