Anuther dun - a Stuart Sun

[deverett]

Excuse the corny subject!

I'm trying to clear my backlog of part finished projects. This one has been languishing as lots of bits in a plastic box for far too long - several years.




And of course, the obligatory video.

[ame]http://www.youtube.com/watch?v=GmB5_Q725LM&feature=youtu.be[/ame]

The noise is coming from the bevel gears driving the valve gear. It is here running at about 15psi with the compressor shut down, but will happily run at less than 5 psi.

Dave
The Emerald Isle

 

[Jasonb]

Looks good dave especially when its going slow.

Jason

PS hope the other half won't miss the bread board!!

 

[b.lindsey]

Well done Dave....what other little gems do you have lurking about in those plastic boxes

Bill

 

[Ken I]

Well done Dave a nice runner and very presentable.

I started with a Stewart D10 kit - and its still in the box - I've been sidetracked by this forum - easilly distracted I'm afraid.

So what else do you have in the boxes ?

Ken

 

[deverett]

Jason
She's on a diet and doesn't eat bread!

Bill, Ken
As the pile of bits gets smaller, you'll see them on here. Until then - Mum's the word!

Dave
The Emerald Isle

 

[arnoldb]

Well Dun Dave :bow: :bow:

Lovely engine, and I think quite a bit more fetching in current livery rather than stored away in plastic boxes!

Kind regards, Arnold

 

[steamer]

Wot arnold said!
:bow:

OK when is the boat going to get built?.... :


Dave

 

[tel]

Great job Dave! It must have been a loooooong time in the plastic box, 'cos they haven't made 'Sun' castings for yonks. Thm:

 

[lazylathe]

Nicely done Dave!!! ;D

Now what about that Robinson???? ???
I need an update!!! :big:

Andrew