krypto
Well-Known Member
Just finished a project, a 3D printed working clock. I bought the STL files from Steve Peterson and his clock website is here:
https://www.stevesclocks.com/
I printed SP8, the "coup perdu" although I used the optional deadbeat escapement.
It was a major project for the 3D printer with over 90 hours just in printing all the parts.
The clock has a neat feature of rewinding itself with a tiny, geared electric motor operated by a reed switch.
The completed clock. It worked right off the bat with no fettling as the part fitment was excellent. The time I spent dialing-in the 3D printer with test pieces was well worth it.
The clock running.
https://www.stevesclocks.com/
I printed SP8, the "coup perdu" although I used the optional deadbeat escapement.
It was a major project for the 3D printer with over 90 hours just in printing all the parts.
The clock has a neat feature of rewinding itself with a tiny, geared electric motor operated by a reed switch.
The completed clock. It worked right off the bat with no fettling as the part fitment was excellent. The time I spent dialing-in the 3D printer with test pieces was well worth it.
The clock running.
