Challenger, Black Widow model engine casting sets

Find deals on amazon
Shop deals on ebay
Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
B

Brian Lawrence

Member
Joined
Mar 18, 2021
Messages
11
Reaction score
2
Location
Calgary, Alberta
Is there anybody out there that still has any of the model engine casting kits like the Challenger, or the Black Widow?

If you have one and wanting to sell it please get ahold of me at by emailling [email protected]

Thanking everybody in advance for thier time & efforts.

Cheers Brian
 
casted said:
No
Click to expand...
Ok
I purchased a set of castings from Cole’s, I think they may have been the last set before the closed up
The castings for the stand we’re missing and they stoped replying to email and never sent the castings that we’re missing
I still have all the rest, I am keeping it until I have more experience, then I will start on it
It’s a nice looking engine and from videos I’ve seen of it running sounds great too
 
Last edited:
90 Degree Fuel Gas Shut Off Valve w/Grommet Clamp Compatible with Kohler 25 462 03-S 25-462-03-S Rotary 13116 for Briggs & Stratton 192980GS 208961 Gas Tank Engine Generator Pressure Washer
$8.89
90 Degree Fuel Gas Shut Off Valve w/Grommet Clamp Compatible with Kohler 25 462 03-S 25-462-03-S Rotary 13116 for Briggs & Stratton 192980GS 208961 Gas Tank Engine Generator Pressure Washer DSparts
YIYANTO 1 Inch Threaded Pump Port Water Pump Assembly Replacement for Harbor Freight Predator for Pacific Hydrostar Clear Water Pump 1" in Ports 79cc 99cc Gas Engine Models 63404 56161
$75.90
YIYANTO 1 Inch Threaded Pump Port Water Pump Assembly Replacement for Harbor Freight Predator for Pacific Hydrostar Clear Water Pump 1" in Ports 79cc 99cc Gas Engine Models 63404 56161 YIYANTO
Honda 31740-Z0A-003 Diode Engine Stop
$16.29
Honda 31740-Z0A-003 Diode Engine Stop MPartsman
Rustark 9Pcs Gundam Model Tools Kit Hobby Building, Repairing and Fixing Set for Kids
$9.79
Rustark 9Pcs Gundam Model Tools Kit Hobby Building, Repairing and Fixing Set for Kids Keadic
Replacement Kohler 7000 Cover gaskets These fit The 7000 Model Engines with Stamped Steel Valve Covers 4 Packs
$13.50
Replacement Kohler 7000 Cover gaskets These fit The 7000 Model Engines with Stamped Steel Valve Covers 4 Packs HABIIID AutoParts
WOTIAN 590607 Pull Start Assembly Recoil Starter 163cc 208cc 797276 for Generator Pressure Washer Parts with Pull Rope
-12%
$14.04 $15.97
WOTIAN 590607 Pull Start Assembly Recoil Starter 163cc 208cc 797276 for Generator Pressure Washer Parts with Pull Rope Advanced shopping
TAMIYA Jeep Willys 1/4 Ton 4X4 Hobby Model Kit for ages 168 months to 1200 months
-21%
$17.85 $22.50
TAMIYA Jeep Willys 1/4 Ton 4X4 Hobby Model Kit for ages 168 months to 1200 months UJC Mart Japan
SV10 V8 Engine Set, V8 Main Body Assembly, Compatible with Dyson V8 SV10 Main Body Assembly Vacuum Cleaner Replacement Part 967812-01 with Screwdriver Set, with Post - Filter*1
$48.99
SV10 V8 Engine Set, V8 Main Body Assembly, Compatible with Dyson V8 SV10 Main Body Assembly Vacuum Cleaner Replacement Part 967812-01 with Screwdriver Set, with Post - Filter*1 YAFEIYING-US
Playz V8 Combustion Engine Model Kit That Runs - Build Your Own STEM Mini V8 Model Engine Kit for Adults & Kids Age 12+, Visible V8 Mini Engine Kit That Works for Adult w/ 270 STEM Parts
-30%
$69.95 $99.95
Playz V8 Combustion Engine Model Kit That Runs - Build Your Own STEM Mini V8 Model Engine Kit for Adults & Kids Age 12+, Visible V8 Mini Engine Kit That Works for Adult w/ 270 STEM Parts Playz
514009761 547961 Oil Fill Cap with O-Ring Seal Replacement for Cat Pumps Pressure Washer Cap 2SF 2DX 3DX 3SP Serious Models Red
$14.50
514009761 547961 Oil Fill Cap with O-Ring Seal Replacement for Cat Pumps Pressure Washer Cap 2SF 2DX 3DX 3SP Serious Models Red NB Direct LLC
michael-au said:
Ok
I purchased a set of castings from Cole’s, I think they may have been the last set before the closed up
The castings for the stand we’re missing and they stoped replying to email and never sent the castings that we’re missing
I still have all the rest, I am keeping it until I have more experience, then I will start on it
It’s a nice looking engine and from videos I’ve seen of it running sounds great too
Click to expand...
If you need a set I can,cast a set from the casting I have also I cast parts mostly alum brass red brass and silver gold. I cant find it but I casted some elemer wall carbs for me one 24k gold the silver one to. I lost them some where. But I can cast them

I might be casting soon note on my casting i don't do cores so no asking for manifolds no tubes.


Let me say that engine has alot of problems due to the intake it's a box I know I spoke to lancer when,I was a kid and his son

Advice make one that flows better I worked on one I opened up the box and inside the manifold

Lol think of the shape of a hersy kiss I made a shape like that it fixed all flow and fuel mix per cylinder was finally since 1968 ran great sad to say that engine gone lost. Ran great a top 10 k,rpm a low of 950

Stay in touch so i don't forget and I advice on,yours soak the block in warm,water check the block most of them from there big problems.
 
If they are cast from castings as he says then watch the sizes!
 
I am more curious what the asking price is. I know what I paid for the Black Widow castings which indeed are top notch but without all the details and rough drawings it’s a project I don’t really have time right now to fix. Some day I will once retired.
 
Jasonb said:
If they are cast from castings as he says then watch the sizes!
Click to expand...
I know the shirink. Been trying to figure thus out.

And the casting would be just the stands. But I agree. Had a brass head it was by the book 5/32 just in one way. This. I,don't get
 
Cessnadriver said:
I am more curious what the asking price is. I know what I paid for the Black Widow castings which indeed are top notch but without all the details and rough drawings it’s a project I don’t really have time right now to fix. Some day I will once retired.
Click to expand...
I got to,give the last caster of the they are way better then,the challger as in casted part. The first ones of the black widow. Ahh test ones. No comment. Its testing lol
 
michael-au said:
Ok
I purchased a set of castings from Cole’s, I think they may have been the last set before the closed up
The castings for the stand we’re missing and they stoped replying to email and never sent the castings that we’re missing
I still have all the rest, I am keeping it until I have more experience, then I will start on it
It’s a nice looking engine and from videos I’ve seen of it running sounds great too
Click to expand...
May i say test you,block for leaks

I,did a simple tape up no leaks and warm,water. Oh boy not fun,leaks just check all that time and mud oil
 
You must log in or register to reply here.

Similar threads

B
Motorcycle Engines
Replies
5
Views
2K
Outback
O
M
Sold Black widow castings
Replies
3
Views
1K
zman92020
Z
N
Black Widow V8 difficulty?
2 3
Replies
44
Views
5K
Mark_1984
M
Propforward
Model Engineer Beam Engine - Reeves Kit
Replies
7
Views
1K
Propforward
Propforward
GreenTwin
Bob Jorgensen's Model Engines, etc.
Replies
9
Views
2K
GreenTwin
GreenTwin

Latest posts

Back
Top