- Joined
- Aug 16, 2013
- Messages
- 1,033
- Reaction score
- 764
This came out better than I had hoped. Two out of the three head covers came out with a very nice fine finish and the bad one is still useable but has some pitting. Not much difference between the first two and I dont think the knife gate made any difference in a pattern this small. The venting on the other hand I think did the most with the last picture being the one that had the least.
All in all a good day. Learned something, got to melt stuff ;D and now have 2/3 good castings that Ill clean up and this time keep.
Hope you enjoyed this as much as I did. And thank you for your comments
All in all a good day. Learned something, got to melt stuff ;D and now have 2/3 good castings that Ill clean up and this time keep.
Hope you enjoyed this as much as I did. And thank you for your comments
![IMG_0860.jpg IMG_0860.jpg](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/33/33635-IMG-0860.jpg)
![IMG_0858.jpg IMG_0858.jpg](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/33/33636-IMG-0858.jpg)
![IMG_0859.jpg IMG_0859.jpg](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/33/33637-IMG-0859.jpg)