vederstein
Must do dumb things....
- Joined
- Feb 26, 2011
- Messages
- 922
- Reaction score
- 750
Onto the main bearings:
These took several hours to do because there are two of them and the shaft hole positions relative to the mounting holes must be as exact as possible.
I started via milling the bottom face, but I quickly realized this was a bad idea because of the tool marks left on the casting. So I did my main facing on the lathe.
These took several hours to do because there are two of them and the shaft hole positions relative to the mounting holes must be as exact as possible.
I started via milling the bottom face, but I quickly realized this was a bad idea because of the tool marks left on the casting. So I did my main facing on the lathe.
![DSC01203.jpg DSC01203.jpg](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/34/34928-DSC01203.jpg)
![DSC01204.jpg DSC01204.jpg](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/34/34929-DSC01204.jpg)
![DSC01205.jpg DSC01205.jpg](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/34/34930-DSC01205.jpg)
![DSC01206.jpg DSC01206.jpg](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/34/34931-DSC01206.jpg)