Whittle V8 pic and request

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

byawor

Well-Known Member
Joined
Aug 15, 2014
Messages
126
Reaction score
35
Location
regina canada
Cam, crank, block and heads lots to go. Somehow I have mislaid the one page of plans on the cam shaft spent an hour searching no luck. If someone could send me a picture i would appreciate it. My email
is [email protected].
Bob
PS the plans were in Model Engineer June 1995 I thinks
 

Attachments

  • V8.jpg
    V8.jpg
    95.4 KB
Started on cam. Second pic is a lobe I cut on edm. More as reference for the one made per Whittles method.
Bob
 

Attachments

  • IMG_1498.jpeg
    IMG_1498.jpeg
    1.8 MB
  • IMG_1496.jpeg
    IMG_1496.jpeg
    1.5 MB

Latest posts

Back
Top