- Joined
- Mar 8, 2012
- Messages
- 249
- Reaction score
- 111
I have tried again to get back into machining since I had my medical problems and it just did not work out for me so I am cleaning out my shop. I am selling all my equipment and some castings and such and that will follow this posting. I will start out with my Jet 1236 lathe which is fully equipped to get you into machining. I will put a few basic pics here and if you are really interested PM me with email and it will take a few emails because I have a lot of pics of closeups and I will get you more pics and what info you may want. I don't want to fill up the pages with too many pieces. A lot of what you see in accessories have never been used. There are 1/4, 3/8, and 1/2 indexable carbide turning sets as well as boring, threading, knurling, cutoff, center sets and pieces. A quick change toolholder with many holders and also a never used older style toolpost set. There is a taper attachment and collet attachment that look never to have been used or mounted. A 4 jaw chuck and faceplate. There is also things not mentioned. There really is a lot of stuff here and I am asking $3000.00 for everything and if you start buying tooling you will know how quickly that adds up. Here is everything you need.
Here is the mill I will be selling, it is a Grizzly G0463 and it is a very capable mill. It has a Shars precision vise on it. It comes with a boring head , a dividing head with tailstock, clamping set, a brand new large endmill set, various endmills, collet set, spacer set, drill chuck and everything is R8. Everything you need to get going.I am asking $1500.00 for all.
Here is the metal cutting bandsaw I am selling and is not very old or used much. It has some new extra blades also. I am selling it at less than half price for $850.00.I am in Berrysburg,PA 17005
Here is the mill I will be selling, it is a Grizzly G0463 and it is a very capable mill. It has a Shars precision vise on it. It comes with a boring head , a dividing head with tailstock, clamping set, a brand new large endmill set, various endmills, collet set, spacer set, drill chuck and everything is R8. Everything you need to get going.I am asking $1500.00 for all.
Here is the metal cutting bandsaw I am selling and is not very old or used much. It has some new extra blades also. I am selling it at less than half price for $850.00.I am in Berrysburg,PA 17005