McOnie Drawings

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

mipigoca

New Member
Joined
Mar 24, 2024
Messages
4
Reaction score
0
Location
Catarroja
Good morning everyone,

Does anyone have drawings for the construction of a McOnie oscillating motor?

Regards and thank you very much in advance.
 
I think this is the same engine.
I am not familiar with it.
This is a photo from the thread below (not my photo).

View attachment 164288

.
https://www.homemodelenginemachinist.com/threads/mconies-s-oscillating-engine-3d-cad.19308/

.
Thankyew for that. I've never seen that. I downloaded all those files. Probably never get around to making it, but it certainly is a different type of oscillator than those I've seen before. Are there castings for this? If there are castings, it is far more likely I would try it.
 
Thankyew for that. I've never seen that. I downloaded all those files. Probably never get around to making it, but it certainly is a different type of oscillator than those I've seen before. Are there castings for this? If there are castings, it is far more likely I would try it.
That's the engine and castings were available from Cotswold Heritage as stated by Jason; they went out of business a few years ago. I was fortunate enough to find someone who had an old set of castings.

It's a very hypnotic engine to watch, here's another video:
 

Latest posts

Back
Top