I would like to thank all of the members of the team that helped build this engine - there was superb craftsmanship from each of them:
chrispare - our ring leader as it were ;D who also took on the front bearing housing
Path - who kindly redrew the engine in CAD and made me and others some very nice pistons, wrist pins and cylinders
Maverick - made that very nice flywheel you see in the picture and the brass nut, and collet, and the con rods (allot of stuff!!)
warranator - an excellent crankshaft (made on a very neat machine no less) and the return crank for the valve
dalem9 - some very nice cylinder heads and provided the copper air tubes as well with extra material
T_ottoboni - made the steam chest cover for all and cylinders, pistons and wrist pins for some others. Nice work and thanks for the key chain!
joe d - the orbital valve and port flange and steam chest - nice work
I made the crankcase (my apologies to warranator again for the delay in getting one to him)
I hope I got that all right
We did have a couple of setbacks - my opportunity to join was created by ill health of D_tanner and a particularly sad set back in the build as we learned of Pascal (pcw) passing away.
Thanks to all involved again and thank you to the forum and Rake60 and the other moderators for choosing this team build as the project of the month. I now need to go and add a karma point to each team member for this build. Lastly - if you have an opportunity to join a team build and feel capable I say do it. It was allot of fun.
Mike