HT Leads

[neil_1821]

So I’m just working my way through the wiring for my hoglet, I’d bought a full set from minimag for the hoglet as I’m based in the UK.

I’ve come to find there are no HT leads and I’m not really sure where I can buy any or how to make them in order to give a good purchase on the spark plugs. Can anyone point me in the right direction?

 

[Blogwitch]

Hi Neil,

In the UK, this is where to get everything you need, from old style fabric leads to the latest silicone type.

Also every type on lead to plug mounting is there as well

http://www.gsparkplug.com/

John

 

[Cogsy]

I've heard of people using test leads from multimeters as HT leads. I've bought some in preparation but haven't actually used any yet so I can't comment on how well they work. Very cheap off ebay though.

 

[Jasonb]

The braided cable may look a bit heavy on the hoglet, For the smaller barstock engines I get small clear spark plug boots and silicon wire for S/S

http://www.cncengines.com/orderpage.html

 

[neil_1821]

Thanks for all the replies, been very helpful as always

 

[tornitore45]

Second Cogsy suggestion on test leads. They are a bit larger than scale, but if acquisition is a problem they can do. Nice, flexible and HV insulation.

 

[TonyM]

I bought mine from http://www.hemingwaykits.com/acatalog/Ignition.html