Yes looks excellent 12v I assume. Unfortunately copper can't be used for points.
Nice coil .
Nice coil .
To save a lot of time you can purchase a great coil from De Bolt Machine for a very reasonable price. I have numerous engines powered with these coils and all run very well.View attachment 128035
Hi
My start on a coil for an igniter.
I had some brass and a length of cast iron rod.
After silver solder to hold the brass to the cast rod and truing up the brass I coated the cast rod and brass with some epoxy to insulate the enameled wire.
The epoxy is hardening on the wire while I took this pic. I Left the lathe running at a slow speed to prevent runs and drips.
I don't know the resistance of the coil as wound.
fingers crossed.
Dennis
An article on igniters and magnetos, etc
Hi
Does this look normal for these coils?