Hi to all from John

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

John Rudd

Well-Known Member
Joined
Oct 14, 2009
Messages
311
Reaction score
2
Hi all,

I finally found where this place is...from a link on another site (Madmodders..)

Read much about HMEM but could'nt find it..Obviously I didnt look hard enough ;)

I have a minimill and a 9*20 lathe and make bits and bob's for my R/C aircraft from time to time...

I best get reading to catch up...

cheers

John
 
Hi John!

Welcome to HMEM!!
Quite a few of us are on madmodders too.

I generally make bits and bobs on my Sherline equipment that usually end up on the "Shelf of Uselessness"!
But i suppose that is how it goes when one is just starting to machine stuff!

Andrew
 
Welcome John,
What types of planes do you work on¿
Any engines for them¿
We all thrive on pics here.
I have a mini mill and a 7x12, I make a lot of rc parts not much for planes though. ☺
-B-
 
K-K,
Some of my planes are ic powered others are electric...The ic ones are glo powered ( gas?...ermm methanol/castor oil mix )

I'll post up pictures..are there any special requirements for posting? I got burnt on a previous forum for posting pics...Dont want to upset anyone.
 
th_wwp
Just keep them related to the topic on hand and no one will have any problems at all!!
The more pics the happier we are!!
Some of us even have pics of our swarf magnets (dogs) on the site!

We especially thrive on build logs with lots of detail and of course PICTURES!!!
;D
Andrew
 
Welcome John :) - hope you enjoy it here ;)

Andrew _obviously_ went through a lot of older posts to know what "swarf magnets" are ;D

Kind regards, Arnold
 
John,

Welcome to our forum.
icon_welcome.gif


Best Regards
Bob
 
Hi John, Welcome to HMEM.

Chuck
 
Hi John,
Let me add my welcome also...glad you found the forum.

Bill
 
Back
Top