Greatings From Chicago!

[lellasone]

Hi All,

I've always been fascinated by miniature engines and now that I'm through undergrad (and have access to a shop), it's time to build some! I plan to kick things off with an Elmer 25 wobbler, and then go from there (maybe a beam engine next, I'm not sure what would be an appropriate second project). Longer term I'm also interested in gas engines, and in making a computer controlled plant with a pump/boiler/engine for a model boat. Although of course that's just the outline of a dream at this point.

Hobbies are always more fun shared, and I'm really excited to get to know all the wonderful people on this forum!

All the best,
Jake

 

[GreenTwin]

Welcome Jake,

I think that is a good plan to start with a simple engine and move up.

There are some great builders here for sure.

Keep us posted on your progress, and welcome to the club.

Pat J

 

[minh-thanh]

Welcome to the forum !

 

[SmithDoor]

Hi All,

I've always been fascinated by miniature engines and now that I'm through undergrad (and have access to a shop), it's time to build some! I plan to kick things off with an Elmer 25 wobbler, and then go from there (maybe a beam engine next, I'm not sure what would be an appropriate second project). Longer term I'm also interested in gas engines, and in making a computer controlled plant with a pump/boiler/engine for a model boat. Although of course that's just the outline of a dream at this point.

Hobbies are always more fun shared, and I'm really excited to get to know all the wonderful people on this forum!

All the best,
Jake

Welcome to the group

Dave

 

[Apprentice707]

Welcome Jake, good luck, and enjoy making the wobbler.

B

 

[Scott_M]

Welcome !
Keep us posted on your progress

Scott

 

[awake]

Welcome to the forum!

 

[Spider Brandt]

Hi All,

I've always been fascinated by miniature engines and now that I'm through undergrad (and have access to a shop), it's time to build some! I plan to kick things off with an Elmer 25 wobbler, and then go from there (maybe a beam engine next, I'm not sure what would be an appropriate second project). Longer term I'm also interested in gas engines, and in making a computer controlled plant with a pump/boiler/engine for a model boat. Although of course that's just the outline of a dream at this point.

Hobbies are always more fun shared, and I'm really excited to get to know all the wonderful people on this forum!

All the best,
Jake

Gday and Wellcome Jake , What's a Wobbler ?

 

[awake]

Gday and Wellcome Jake , What's a Wobbler ?

Wobbler is the generic term for an engine in which the cylinder pivots as the piston moves up and down; the pivoting action implements a simple valve system and is a natural function of the changing location of the connecting rod on the crank. Basically, a wobbler is one of the simplest designs one can make. Can be driven by steam, but usually driven by compressed air.

 

[Ken I]

What's a wobbler.

This is :-



See plans etc. for this engine at the following post :-

Magnetically Sprung Wobbler

Regards, Ken

 

[Spider Brandt]

What's a wobbler.

This is :-



See plans etc. for this engine at the following post :-

Magnetically Sprung Wobbler

Regards, Ken

That was good , I've not seen one before thank you Ken

 

[lellasone]

That's a really slick looking project, and the thread seems like a gold mine. Definitely going on my to-build list.

Edit: What's that air connection you are using? I've been looking for something small enough to fit / look good on the build.

 

[Ken I]

Festo make small couplers (KD range) - the one in the video is a 5mm - they go down to 3mm.
They auto close and I've never had a peep of trouble with them.
I use the 5mm on all my models.
In some cases I turn the male part when I want it integral to the motor (as in the case of my CIRCE engine).

Examples of home made fittings - on the left a 5mm with an M3 thread (Festo don't make one like that) and the custom inlet/exhaust ports for my CIRCE motor.
They also make a range of small throttles as well.
Festo attachment. (Disclaimer I have no financial interest in Festo or its products).
Go ahead and mine the site to your heart's content - also look for plans - particularly under Downloads, Plans & Engines.
Many members post their designs as well as build threads which are very informative.
Welcome to HMEM.
Regards, Ken