got me some drills..any ideas

[chrispare]

I was given some drills to use or sell today. They are churchill comet high speed taper shank twist drills, ranging from small #2 shank to these great big 2 inch #4 shank.

First off I cant seem to find any info to see what they are worth (they are still brand new with the protective coating on them)

Anyone know?

 

[dwentz]

To get an idea of what they are worth search taper shank drill on ebay, or morse taper drill.

I have a few Morse taper 2 ones but do not use them much. My Moms Husband has a large drill press, 5 foot swing or better, and it takes morse taper 4 drills. Ever drill a 3 inch hole through 1 inch plate? The drill press did not even break a sweat!

Dale

 

[chuck foster]

Ever drill a 3 inch hole through 1 inch plate?

at my first job after leaving high school i had to drill 6" holes though 12" plate we had a big radial drill press.
the drill bit was a spade type bit that i made.

chuck

 

[ShedBoy]

I got about 30 taper shank drills ranging from 14mm up to 32mm from a dumpster outside a engineering company who were having a clean out. They were wrapped in rags and some had never been used. When enquired I was told they were no longer needed and I was welcome to them. I use them alot on the lathe for removing large amounts of material when boring. If you have machine capable of using them I would keep them.

Brock

 

[mygrizzly1022]

Hi ..


Those big drill bits are worth some serious coin!!!


Cut and paste from a Granger web site......Bert

Taper Shank Drill,2 In,#5MT,Blk Oxide
Item # 5TVH7
Taper Shank Drill, Standard, Number of Pieces 1, General Purpose Grade, High Speed Steel, Black Oxide Finish, Conventional Point, Decimal Equivalent 2.0000 WESTWARD
5TVH7 3314 Usually ships
From mfr. w/in 4 bus. days 1 $414.00
See All: Taper Shank Drill Bits