Good info source

[Vietti]

I stumbled onto a good source for model engine building info that maybe of general interest. I esp. like the section on making rings and honing a cyl bore.

Hope this works

https://adriansmodelaeroengines.com/catalog/main.php?cat_id=182

 

[kuhncw]

Thanks. Lots of good information.

Chuck

 

[mrehmus]

You also want to look at https://www.modelenginenews.org/.
Ron was the forerunner of on-line model engine information. When Ron died, Adrian took up the burden if I recall correctly.

 

[Chris Murphy]

Just be aware that Ron was an IT guy-as well as a talented machinist-unfortunately that means his site is encrypted as far as administrator access is concerned, and he left us about a decade back. What this means is that the 'modelenginenews.org' website is slowly deteriorating as it cannot be maintained as no one other than Ron had administrator access. Visit it while you still can is what I'm saying-as it will slowly become less and less accessible. Adrian is doing his best to preserve what articles he can-since he wrote quite a lot of them-on his own website, but there is only so much one man can do-and 'modelenginenews.org is a big website.

ChrisM
'ffkiwi'