Gang Tool for the 9X20 CNC Lathe

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

stevehuckss396

Model Engineer
Project of the Month Winner
HMEM Supporting Member
Joined
Nov 19, 2008
Messages
4,968
Reaction score
1,729
Location
Sterling Heights, MI
Having to make hundreds of sparkplug parts at a time I made a gang tool for the CNC lathe. It will spot drill, drill, bore a step with boring bar, and then clean out the drill hole and square up the bottom all in one press of a button. Major time saver as it does the entire job in about one minute.


 
Slick use of a small lathe. I'm wondering what you are using for CNC control?
 

Latest posts

Back
Top