Finished Rupnow Double Horizontal

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
Hi Paul,

I use the finest glass beads that McMaster Carr sells to bead blast after I have draw filed or whatever is necessary to remove all the mill marks and de-burr the parts. Glass beading will not hide the mill marks. Usually blast the part at a distance from the gun to be careful not to damage anything.
Glass beading before cold bluing the steel parts works real good also.

Brian
 
Sir
Your project looks superb. I am the Apprenticeship coordinator for the Apprenticeship 2000 program in North Carolina. My apprentices have made a couple of Brian Rupnows designs. They have been wonderful training exercises as well as something to keep after they have completed the project. I was wondering if there were any prints or drawings available for this project. You can contact me at [email protected] I would love to speak to you about this project and maybe send you some pictures of what we have completed.
Thank you for your expertise.
Bob
 
Very, very nice. Classy presentation too!
 
Back
Top