Xijian Su
Member
Hallo to all!
Recently, I started my first project. I tried to cast aluminum alloys with plaster mold.
This is the engine block designed with SOLIDWORKS. It takes me a week to build the 3D model.
Then I bought a can of silicone rubber from the "Taobao" for the mold making.
There're 3 mold for the plaster core and mold making.
This is the mold that hardened. The I put it into my electric furnace.

Recently, I started my first project. I tried to cast aluminum alloys with plaster mold.
- Design the engine parts

This is the engine block designed with SOLIDWORKS. It takes me a week to build the 3D model.

- Design the mold for 3D printing
![BZJJS]R}VQXD%]%R11N@BZN.png BZJJS]R}VQXD%]%R11N@BZN.png](https://cdn.imagearchive.com/homemodelenginemachinist/data/attach/67/67804-BZJJS-R-VQXD-R11N-BZN.png)
Then I bought a can of silicone rubber from the "Taobao" for the mold making.

There're 3 mold for the plaster core and mold making.


- Plaster mold making

This is the mold that hardened. The I put it into my electric furnace.
