Boiler Feed Pump, part one, PM Research Kit

[Gerald Pierce]

I made the PM Research pump kit.

I made three videos showing how I did the set up and machining of the parts. Not all of the work is shown.

Plans include a copyright and are not shown.









Gerald Pierce

 

[Gerald Pierce]

Boiler Feed Pump, parts two and three

 

[Zeb]

Nicely done! I'm working on the PM #1 boiler and picked up one of those pumps as well.
I'll have to get extra creative on boring and spot facing the ball seats using a smaller endmill (Sherline setup). Your setups will be helpful for visualizing the steps I'll need to work through.