Search results

Hi charles Please let me know if i measured the right things for you Or if u need more Chris

Now lp valve center to portface

The lp port with

Actually the port with is 3.48 mm

Thats the valve rods

The trapezional opening got a top lip Around Do u need the dimension inside ?

with of lp port

I shoot another pic

Thats it

Hi jason Just want to say The two centers close together are the middle of the valve eccentric So one is for the big and the other is for the small cylinder and the further appart ines are outside so its devided in the middle The crank pins are on the other side Indicated Chris

Hi jason and charles The centers for the crankpins are on. The small side with the eccentric to power a condenser or soemthing After work i can shoot better pics Chris

Actually 295

Sorry charles phone on charge 30.298 About

Ok now Hi jason ithink i got the go Look the crankpins are on 9 and six And the high point of the valve eccentric Is about 2 and may 2 30 for the 2 in the middle visible on the flange The outer ones the high point of eccentric corresponds with the left side crank pin 6 With about 10 The other...

Hi jason yes the centerhohles are for crankshaftturning Thats why i thought the thing with the degrees However the crank pins for the pistons I will send The valves are just eccentrics i think Bud have to do it t morrow Chris

Hi jason and charles The ofsett is If jason could match 360degrees Over the flange then some degrees could be Obtained easy?? Chris