Search results

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. littlelocos

    Cabin Fever 2016

    Joy and I will be there this year, set up right inside the door to the main hall. We've kicked around the idea of bringing our 3D printer and have it running during the show. If you make it to the show, stop by and say "Hi." We're looking forward to a good time. See you there, Todd...
  2. littlelocos

    Breisch steam engine?

    Hello SmallHaul, That's Paul Breisch's Cornwall Blowing Engine and was offered as a kit, complete with the base. Myers Engine Works has the patterns and the kit is listed on their Web site. http://www.myersengines.com/engines/cornwall_engine.htm The prototype can be found at the Cornwall...
  3. littlelocos

    Windows shopping for 3-D printer.

    I received the Lulzbot Mini yesterday and printed a couple of rough test prints. Much better having switched to the finer settings. Material is 3mm Taulman N-Vent running at 230C, 60C bed, 180microns, 50mm/sec, w/ 20%fill. Of course, printing a 2"-tall Yoshi. Print time was 90 minutes...
  4. littlelocos

    Windows shopping for 3-D printer.

    Tin, This one fits your size bill and could be machined from aluminum on your equipment rather than spending $$$ on the full kit. Appropriately named: Hackerbot 2.0. https://opensourcehardware.it/en/61-hackerbot.html https://github.com/OSHW/HackerBot/releases/tag/2.0 You may need the...
  5. littlelocos

    Windows shopping for 3-D printer.

    Hey Tin, Have you checked these guys out? They also have aluminum corner upgrades and a lot of options for each kit. http://www.ultibots.com/mini-kossel-v-slot-3d-printer-beta/ http://www.ultibots.com/kossel-250-v-slot-3d-printer-diy-kit-beta/ Look like some pretty-well thought out...
  6. littlelocos

    Windows shopping for 3-D printer.

    I finally broke down and bought a 3D printer. After looking thru way too many options, I ended up with a demo model of the Lulzbot Mini. This was based on good reviews, high-resolution printing, self-calibrating/leveling, self-cleaning, multiple material options, and open-source design and...
  7. littlelocos

    Resin for patterns

    I've used two different combinations of materials with differing results Favorite: Freeman 1035 / Freeman Repro One Also Used: Smooth-On PMC-744 and Smooth-On Task 18 The Freeman materials have a lower viscosity and don't have a tendancy to form and collect bubbles on the surface of the...
  8. littlelocos

    Calculated Industries is scandalous.

    Thanks for the tip. I've thought about getting the app. ....until now. Todd.
  9. littlelocos

    The future of the "engine kit"

    Ron, I would be in the dissenting crowd in the "make the CAD files available" debate. After spending on the order of 300-400+ hours on producing a professional set of drawings, and another 500+ on a prototype, handing over the CAD file to a buyer and then seeing it posted all over the Internet...
  10. littlelocos

    local foundry ???

    Believe it or not, there is a small foundry right here in Hagerstown, MD - Blaine Window Hardware (www.blainewindow.com). They cast red brass, aluminum, and white manganese bronze (aka White Tombasil). They did some casting for me a few years ago for my Parsell & Weed project. I have a...
  11. littlelocos

    solid state ign

    Dittoing Rustkolector, I purchased mine from S&S Machine & Engineering and have been very happy with it. See http://www.cncengines.com/ It fits nicely in a hand-cream "tin". Enjoy, Todd. Littlelocos Model Engineering
  12. littlelocos

    1/3-Scale Parsell & Weed Vertical H&M Engine Completed

    Here's the second video showing the working side of the engine. No cams here as the push rod is connected directly to the timing gear. Enjoy, Todd. https://youtu.be/oJ_aC_2xaCE
  13. littlelocos

    1/3-Scale Parsell & Weed Vertical H&M Engine Completed

    Thanks. I did shoot a few videos of the prototype before delivering it. Now, I need to make one for myself. :-) This one was designed by Woody Sins, and cast in 1993, but never built. I built it for Woody in exchange for his left-over castings. Now he has a pair of prototypes (one...
  14. littlelocos

    Essex Caloric Engine - 1/2-scale

    1/2 Scale replica of the Essex Caloric Engine (Stirling Cycle) Cycle: Stirling / Hot Air Bore: 0.960" (24.4mm) Stroke: Power Piston - 0.50" (14.5mm) Displacer Piston - 1.000" (25.4mm) Compression Ratio: 1.47 : 1 Fuel: Denatured Alcohol or Propane Castings from Littlelocos Model Engineering
  15. littlelocos

    Parsell & Weed - 1/3-scale Vertical

    Spec's Flywheels5" Bore0.850" Stroke1.312 OALength/Height 10" Castings from Littlelocos Model Engineering Also available in horizontal configuration.
  16. littlelocos

    1/3-Scale Parsell & Weed Vertical H&M Engine Completed

    Recently finished the 1/3-scale P&W Vertical prototype. Thought you all would enjoy a photo of how it turned out. Todd. Littlelocos Model Engineering www.facebook.com/littlelocos
  17. littlelocos

    Restoration of a Vernon No. 0 Horizontal Mill

    Very cool modification. I was thinking the Bridgeport M would be a bit large, but you've solved that for sure. Well done, Todd.
  18. littlelocos

    Torch advice needed for boiler project

    The propane torches can put out a huge amount of heat and can quickly heat up larger items. I scanned the Sievert Charts from my toolbox and posted them here. The largest tip I have is the 2943 at 26000 Watts (88700 BTUH). The smallest tip 3938 at 250 Watts (850 BTUH). My favorite heads...
  19. littlelocos

    Building Kozo's New Shay locomotive

    Really-REALLY nice work! Absolutely beautiful.
  20. littlelocos

    Restoration of a Vernon No. 0 Horizontal Mill

    I bought a Vernon mill last Spring and am thinking the group would like to see progress on it's restoration. It has been a second project for a while now and is nearly finished. I've been keeping a photo-log of progress and have recently posted the account so far on our Facebook page. There are...
Back
Top