What collet system ?

[ksor]

I have a holder for some - to me - unknown collet system !

It has a number stamped on it: LAIP 04 0101 0505

I can't find anything on that number on the internet and I have tried a ER32 collet in the holder and it's NOT a ER32 !

What is it then ?

More details here in danish but you can Google Translate to the right just under the menu line - choose whatever language you like in the combobox:

http://kelds.weebly.com/generelt-spaeligndetang-system.html

 

[Swifty]

Here is a link to the holder http://www.cedifer.com.br/imagens/catalogos/pdf/cap_7_morse.pdf it mentions that you can find the collets on another page which isn't shown, a bit more searching on that site will most likely find it.

Paul.

 

[Swifty]

You should find the collets here http://www.laip.es/files/Downloads/PINZAS.pdf
Din 6388 collets appear to be the ones that you need.
Paul.

 

[ksor]

Here is a link to the holder http://www.cedifer.com.br/imagens/catalogos/pdf/cap_7_morse.pdf it mentions that you can find the collets on another page which isn't shown, a bit more searching on that site will most likely find it.

Paul.

Thx for the link !

 

[ksor]

You should find the collets here http://www.laip.es/files/Downloads/PINZAS.pdf
Din 6388 collets appear to be the ones that you need.
Paul.

Thx for the link !

 

[ksor]

Now I've got a little further up the road to this generel holding system for my shop ! :lol:

More details here in danish but you can Google Translate to the right just under the menu line - choose whatever language you like in the combobox:

http://kelds.weebly.com/generelt-spaeligndetang-system.html

 

[Blogwitch]

Collet nut threads for ER32 is M40 x 1.5 and for ER40 is M50 x 1.5.

This little chart should help you.

http://www.arceurotrade.co.uk/Catalogue/Collets/ER-Collets

John

 

[ksor]

Collet nut threads for ER32 is M40 x 1.5 and for ER40 is M50 x 1.5.

This little chart should help you.

http://www.arceurotrade.co.uk/Catalogue/Collets/ER-Collets

John

I have found out what collet system it is 462E
... and then what threads 48 mm / 2 mm

 

[ksor]

More details here in danish but you can Google Translate to the right just under the menu line - choose whatever language you like in the combobox:

http://kelds.weebly.com/generelt-spaeligndetang-system.html