Wanted Wall 30cc Single Cylinder Drawings

[fltenwheeler]

I am in need of a set of drawings for the Wall 30cc single cylinder engine that I just purchased.
Thanks
Tim Meyer

 

[Jasonb]

A bit of a rare beast

 

[MrMetric]

I *think* I may actually have a plan sheet for this... The trouble is, I'm not exactly sure where! I think it is in a box with the engine, in a storage locker. :-( I'd have no problems helping you out, but I don't have any immediate plans to go searching for the plans....

 

[fltenwheeler]

I am in no hurry. I have a couple of projects I need to finish before I work on this engine.

Thanks

Tim Meyer

 

[MrMetric]

Hi Tim,
I have some trips coming up so I'm not sure I'll be able to help you here for a bit. The bigger problem is that I bought my Wall is that I bought it almost a side note. My main interest were a few other engines. Now, that doesn't mean I'm not interested in the Wall, it just means that it is on the back burner's back burner, so to speak. But.... I *am* interested in helping you. I feel very strongly that we all need to support one another, and I know how frustrating it can be to be searching for information and only hear crickets.

Alan

 

[bluejets]

Think there may be a set of exploded view/sectioned drawings in this book......... https://www.teepublishing.co.uk/books/for-the-aeromodeller-engine-builder/model-petrol-engines/

Model Petrol Engines By Edgar T. Westbury : Free Download, Borrow, and Streaming : Internet Archive

 

[Jasonb]

Nothing in that book. There are a couple of photos of other wall engines but not this one.

 

[Red_dog]

Always looking for Plans myself. This might be what you’re looking for.

Goggle: "Gary Moore" model engine Popular Mechanics

Part I: Popular Mechanics - Google Books

Part II: Popular Mechanics - Google Books

 

[Jasonb]

It's an Elmer Wall design so not the Gary Moore one.

 

[Red_dog]

A handwritten note in the right-hand column of pt.1, pg. 1 indicates the source for the castings is Elmer Wall.

 

[bluejets]

Nothing in that book. There are a couple of photos of other wall engines but not this one.

For some of us, that is more than enough.

 

[Jasonb]

Red Dog if you look at the images in the magazine article you will see that it's not the same engine, crankcase mountings are different, cylinder on this engine is flange mounted but one in the mag long head studs etc. And at 1" bore it's not going to be 30cc, it's the smaller 10cc one.

I may have the Carb drawing for this engine but that's all.