Tiny I.C. Engine

[gbritnell]

Hi Steve,
The caps were bored in place to about .0005 smaller than the diameter of the bearings. With the caps tight it holds them in place.
gbritnell

 

[steve-de24]

Hi George,
Thanks for your quick reply.
Regards Steve.

 

[Scott_M]

Well, I am a bit late to the party. But want to join the club. I built a Tiny too!

I started a new thread here Another “Tiny” I.C. My first model engine

Scott

 

[stevehuckss396]

Very late, but very nice!

 

[Scott_M]

Thanks Steve!

Scott

 

[gbritnell]

It's been awhile but I believe I posted the drawings to make it a true hit and miss engine. If you want to go that direction send me a PM and I will give them to you if you can’t find them. Being as we're just a stones throw away (Strongsville) you're welcome to come and look at my engines

 

[GailInNM]

Welcome to the "Tiny" club. Great workman ship and a nice runner. I will be following your new thread to see what variations and innovations you have incorperated in your "Tiny".
Gail

 

[Scott_M]

Thanks George and Gail
I have already incorporated some of your ideas into mine. I really appreciate the willingness of this community to "share" it is very refreshing, especially in this day and age.
George, thanks for the offer ! I would like to meet you Kind of busy this week, I will send a PM later this week. I think my heat problem would be greatly diminished if it wasn't running 6-7 grand. Hit & Miss would solve that.

Thanks guys

Scott