So this guy handed me a card with this forum on it at Rough & Tumble ....

[Jeff-in-PA]

I met Tin Falcon today in the machine shop at Rough & Tumble in Kinzers Pa today. Seems like a good guy and ask to check out the forum. Looks like a good bunch here

I've been a machinist for over 30 years and have a fair amount of welding/fabrication experience too. I have a few machines at home, a 1932 Atlas 9" x18" lathe ( first year of V belts ) , a Central Machinery bench top mill, 1-1/2 hp 17" craftsman drill press, 14" abrasive cut off saw and a Hobart Handler 187 mig welder.

Off to lurk some more Thm:

Jeff

 

[Tin Falcon]

Jeff: welcome to the forum. Glad the card was not turned to pulp in the washing machine or used as a tooth pick .
Nice chatting with you at R&T hope you enjoy it here.
Tin

 

[dsquire]

Jeff

Hi and welcome to HMEM. Have a look around and I am sure that you will find a few things that interest you. If you have any questions just ask as there is always someone around to give an opinion or an answer. We look forward to your participation in the various forums.

Cheers

Don

 

[ironman]

Welcome to the forum. It is always a pleasure to have someone with experience to join. Thanks to you Tin also.

Ray

 

[Jeff-in-PA]

Tin,
Nice talking with you too.

Don,
Thanks for the welcome.

Ray,
I'll be more than happy to help where I can. If everyone helps out with what they know, more folks will be inclined to help out the other folks were they're having a problem.

Jeff

 

[Omnimill]

wEc1 to the forum Jeff.

Vic.