Rough and Tumble Engineering Society

Home Model Engine Machinist Forum

Help Support Home Model Engine Machinist Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Tin Falcon

Well-Known Member
Joined
Jul 9, 2007
Messages
7,207
Reaction score
789
Guys:
as I mentioned in another thread I went to R &T today to the blacksmith Days one of the quiet less attended events . R & t is on RT 30 In Kinzer PA between Gap and Lancaster. R & T is a living history museum located on 52 acres and is dedicated to mechanical .industrial and agricultural history. You can find out more on there web site athttp://www.roughandtumble.org/
Today the engines were Idle and some of the buildings closed . But the last I went i was semi chastised for not taking photos so today I shot off a few and will post them. these are not moddles but full sized steam engines.
Tin

Vertical.JPG
 
You want to hear something strange?

The Coolspring Museum and shows are less than 10 minutes from my home.
I've never been there!

Every time they have a show or flea market I've had to work that weekend.

Rick
 
Same here. Off this weekend , and work the next .Of course they have a flea market that has some real good buys
 
Back
Top