Greetings to all from Ontario, Canada
Although I'm not creating engines yet, this looked like a friendly place to share some of the work that I've been doing into the wee hours of the morning when I should have been sleeping, so I decided to sign up and start snapping some photos.
Here's a link to the images (use the menu on the left to navigate the galleries):
http://s296.photobucket.com/albums/mm185/sparky961/Metalworking/
As a preview, here's a picture of my latest project (more in Metalworking/CNC/Z-Axis) - a Z-axis retrofit for my Craftex B2229.
Have a look at the "Miscellaneous Parts" gallery for some of my recent and not-so-recent creations. The adapter plate to go between the rotary table and 3-jaw chuck was one of the first projects I undertook about 4 years ago with this machine. It's a real pain to get it centered, but it works.
I've learned a lot since then, and I hope that by crawling out of the basement and into some online communities that I can learn and share a lot more!
-Brian
Although I'm not creating engines yet, this looked like a friendly place to share some of the work that I've been doing into the wee hours of the morning when I should have been sleeping, so I decided to sign up and start snapping some photos.
Here's a link to the images (use the menu on the left to navigate the galleries):
http://s296.photobucket.com/albums/mm185/sparky961/Metalworking/
As a preview, here's a picture of my latest project (more in Metalworking/CNC/Z-Axis) - a Z-axis retrofit for my Craftex B2229.
Have a look at the "Miscellaneous Parts" gallery for some of my recent and not-so-recent creations. The adapter plate to go between the rotary table and 3-jaw chuck was one of the first projects I undertook about 4 years ago with this machine. It's a real pain to get it centered, but it works.
I've learned a lot since then, and I hope that by crawling out of the basement and into some online communities that I can learn and share a lot more!
-Brian
